Geist G1027 Bedienerhandbuch PDF herunterladen (Seite 3)

GM1024 Rev 2

Rev Date: 7/28/2014

Specifications

Overview

The J, MJ and VHV Series products are Power Distribution Units (PDU) intended for connection to

a 15 or 20 Amp AC Mains circuit

. The PDUs are designed to be powered by either a single phase

or a three phase AC input circuit. Three phase units can be configured for either a delta or wye

input connection. J, MJ and VHV Series PDUs can optionally be configured with a Geist Current

Meter that provides local monitoring and display of each output circuit current. Alternatively, J,

MJ and VHV Series PDUs can be configured with a Geist Current Monitoring Meter that provides

both local and remote monitoring of input and output line current. J and VNV Series PDUs can

also be configured with advanced wireless technology from Packet Power which allows for remote

monitoring of input and output power through a wirelessly connected gateway.

Environmental

Temperature

Operating (J, VHV): 10°C (50°F) min 45°C (113°F) max

Operating (MJ): 10°C (50°F) min 25°C (113°F) max

Storage: -25°C (-13°F) min 65°C (149°F) max

Humidity

Operating: 5% min 95% max (non-condensing)

Storage: 5% min 95% max (non-condensing)

Elevation

Operating: 0 m (0 ft) min 2000 m (6561 ft) max

Storage: 0 m (0 ft) min 15240 m (50000 ft) max

Electrical

See nameplate for unit ratings.

Receptacle Ratings

NEMA 5-15R or L5-15R 125 Volts, 15 Amp

NEMA 5-20R or L5-20R 125 Volts, 20 Amp

NEMA 6-20R or L6-20R 250 Volts, 20 Amp

IEC-320 C13 125/250 Volt, 15 Amp (per Receptacle Bank)

IEC-320 C19 125/250 Volt, 20 Amp

Networking (For Current Monitoring Meter Units Only)

Protocols

HTTP, ICMP, DHCP, TCP/IP, FTP

Global Versions of the VHV Series are intended to be connected to a 16 Amp AC Mains Branch

Circuits

1 2 3 4 5 6 7 8 ... 26 27

Keine Kommentare

Geist G1027 Bedienerhandbuch Seite 3